|
Degasifiers Factory made
Features
• Factory -made cylinder FRP degasifiers
• Typical gases to be removed: SO2, 2H2S, SO3, and CO2
• Custom designed up to 7 m diameter
| Type: |
Counterflow |
| Fabrication: |
Factory-made |
| Material: |
FRP using filament winding technique |
| Air flow: |
Forced draft |
| Water flow: |
100 m 3/hr to 3,000 m 3/hr per unit |
| Industries: |
Chemical , Desalination , Food , Pharma |
General
For projects of up to 3,000 m3/hr, cylinder FRP degasifiers are a perfect fit. The vessel in most cases is made of fiberglass reinforced with orthophtalic, isophthalic, vinylester, or epoxy resins. Fire-retardant and UV-resistant supplements are standard. The vessels comply with British standard (BS 4994) and the American ASTM D 3299-81. Water distribution is carried out using an array of pipes and gravitational nozzles. Air is forced into the vessel by two axial fans in order to minimize energy cost. The PVC fill, fans, motor units, and distribution system are installed at YWCT’s premises and the system is sent to the job site as a PlugN’Play assembly.
Options
• Pultruded FRP hand rails and ladders
• Transport to customer’s location
• Installation at project site by YWCT’s assembly teams
• Up to 97% gas removal
|
|
|
|
|
|
|
|
