|
FRPP Series
Features
Pultruded fiberglass polyester field-erected cooling towers
Heavy-duty cooling towers designed for industrial applications
Optimal thermal performance design
Highly resistant to corrosive environments
| Type: |
Counterflow |
| Fabrication: |
Field-assembled |
| Material: |
Pultruded and hand-laid FRP |
| Air flow: |
Induced draft |
| Capacity: |
2,000,000-20,000,000 kcal/hr per cell |
| Water flow: |
400 - 4,000 m3/hr per cell |
| Industries: |
Oil and Gas, Pharmaceutical, Power plants, Refineries, large-scale HVAC systems.
|
General
YWCTs FRPPs are induced-draft cooling towers made of FRP. The structure of our FRPP series (support beams and columns) is made of composite continuous fiberglass pultruded sections that comply with CTIs STD 37 and conform to ASTM E84D with a flame spread rating of below 25. FRPP cooling towers are positioned over a concrete basin. Just as for our CING series, YWCT provides its customers with scale drawings of the concrete cement, including locations and production drawings of all pipe fittings in 2D or 3D. Also, as in our CING series, the size of a single cell ranges from 6m X 6m to 15m X 15m. When the concrete basin is ready on site, YWCT sends its assembly teams to the job site, where one team sets the pultruded FRP structure, and the other furnishes the cell once the first team has erected it.
Pultruded FRP cooling towers have become an alternative solution to traditional concrete cooling towers, since in many cases they cost less and their erection time is much shorter than that of cooling towers made entirely of concrete. In addition, pultruded FRP towers in many cases offer superior corrosion resistance.
Options
Additional veil layers to increase corrosion resistance
Pultruded FRP hand rails, walkways, and ladders
Low-noise fans
Complementary subsystems: filtration system, water treatment system, heat exchangers, VFD
Nickel alloy connectors (e.g., Hastelloy C-22)
Elevated basin for optimal use of space
|
|
|
|
|
|
|
|
